|
Product Detail :
|
Supply of Civil Lab Instruments (q3) Liquid Limit Device (motorized), the Liquid Limit Data of Soils is Useful to Correlate Mechanical Properties, of Soil, Such as Compressibility and Lower Shear Strength. Liquid Limit is, the Water Content at Which Soil Passes From Zero Strength to An Infinite, Strength, Hence the True Value of Liquid Limit Cannot Be Determined. for, Determination Purpose Liquid Limit is That Water Content at Which a Part of, Soil, Cut By a Groove of Standard Dimensions, Will Flow Together for a, Distance of 1.25cm Under An Impact of 25 Blows in a Standard Liquid Limit, Apparatus. the Soil at the Water Content Has Some Strength Which is About, 0.17n/cm. Sq. (17gms/sq.cm). at This Water Content Soil Just Passes From, Liquid State to Plastic State. It Consists on a Brass Cup Held on An Adjustable, Bracket., the Cup Can Be Adjusted for a Fall of 1 Cm and Can Be Raised An Dropped, on a Rubber Base of Standard Hardness By Cam Action. Complete with One, Casagrande Grooving Tool, One Astm Grooving Tool and a Height Gauge, Block. a Counter to Register the Number of Blows., Spares, • Casagrande Grooving Tool., • Astm Grooving Tool, Height Block, 1cm High., 01, , 2. Soil Cone Penetrometer, for Determining the Liquid Limit of Soils. This is Especially Useful to, Obtain Reliable and Accurate Results of That Soil Which Have Low Plasticity, Index. the Percentage Moisture Contents Determined When Cone with, Half Angle of 15-30 Minutes Under a Total Sliding Weight of 148 Gm, Penetrates 25mm Gives the Liquid Limit., 01, , 3. Shrinkage Limit Set, Shrinkage Limit is the Maximum Water Content at Which a Reduction in, Water Content Does Not Cause An Appreciable Reduction in Volume of the, Soil Mass. at Shrinkage Limit, on Further Reduction in Water, Air Enters, in to the Voids of Soils and Thus Keeps the Volume Constant. the, Apparatus Can Be Used to Determine Shrinkage Limit and to Calculate Other, Shrinkage Ratio, Shrinkage Index and Volumetric Shrinkage., Set Consists of One Each, • Porcelain Evaporating Dish, • Shrinkage Dish, • Glass Cup, • Perspex Plate with Three Metal Prongs, • Flexible Spatula 100mm, • Glass Cylinder, • 25ml X 1ml, Supplied Without Mercury, • Plastic Wash Bottle 500ml, 01, , 4. Plastic Limit Set, Moisture Contents at Which Soil Has Smallest Plasticity is Called Limit., for Determination Purpose Plastic Limit is Defined as the Water Content, at Which a Soil Will Just Begin to Crumble When Rolled in to a Thread of, 01, , Institute of Engineering and Technology, Mohanlal Sukhadia University, Udaipur (raj.) 313001, 3mm Dia., the Complete Set Consists of One Each, • Glass Plate 20cm X 15cm Having Round Ends, • Brass Or Stainless Steel Rod 3mm Dia X 150mm Long, • Flexible Spatula 15 Cm, • Set of 6 Moisture Containers, • Porcelain Basin 150mm Dia, • Plastic Wash Bottle 500ml, 5. Core Cutter, This is Used for Determination of in Situ Dry Density of Natural Or, Compacted Fine Grained Soil, Free From Aggregates. a Cylindrical Cutter, is Used to Extract a Sample of the Soil with the Help of a Dolly and, Rammer. From the Weight, Density and the Moisture, and Dry Density of, the Soil is Ready Calculated .it Consists One Each Of Cylindrical Core, Cutter Mode of Steel, 127.3mm. Long And100mm Internal Diameter., Steel Dolly, 25mm High with a Lip to Enable It to Be Located on Top of the, Core Cutter, Rammer with Detachable Steel Rod., Spare, Optional Extra and Accessories, • Cylindrical Core Cutter 100mm I.d. X 175mm Long, • Dolly, • Test Form Pad of 50, 01, , 6. Sand Pouring Cylinder, This Apparatus is Used for the in Place Determination of the Dry Density, of Compact, Line and Medium Grained Soils and for Layers Not Exceeding, 500mm Thickness. the Complete Apparatus Consists One Each of Small, Sand Pouring Cylinder, 3 Litre Capacity Fitted with Conical Funnel and, Shutter. Cylinder Calibrating Container, Internal Dia 100mm and 150mm, Height., Note, Sand Pouring Cylinder Medium (150mm) as Per is 2720 (p-xxviii), 01, , 7. Sand Equivalent Test Set, Used to Determine the Relevant Proportions of Clay-like Or Plastic Fines, and Dust in Granular Soils Fine Aggregate Consists Of, • Acrylic Graduated Cylinder (4 Nos.), • Rubber Stopper for Cylinder (4 Nos.), • Graduated Steel Rule 450 Mm, • Funnel 100 Mm Plastic, • Aspirator Bottle 5 Ltr Plastic with Rubber . Stand for the, Aspirator Bottle with Siphon Assembly, • Irrigation Tube with Stop Pinch Weighted Foot Assembly, 01, , 8. Proctor Compaction Test Apparatus, Complies with Following International Standardsbs 13774, Bs 19242, Used for Determining the Relationship Between the Moisture Content and, Density of Compacted Soil., Construction Details of Standard Proctor Mould , the Moulds Include Collar, Mould Body and Base Plate. It Will Be Made, of Mild Steel Having Capacity of 944 Cm3. the Mould Will Be Fitted with, a Detachable Base Plate and Removable Extension Collar. the Internal, 01, , Institute of Engineering and Technology, Mohanlal Sukhadia University
|